< back

Malt Mill with Hopper and flexible Grist-Auger

Malt-Mill with Hopper:
Two-roller malt mill designed to prepare grist for brewing by dry-milling of malt with adjustable outcoming grain-size. Adjustable rollers allow for proper malt coarseness. Malt hopper mounted on top of malt mill is outfitted with safety cage and magnet positioned at the base of hopper, preventing any metal items from entering the mill. The milling-rollers are driven by asynchronous motor with belt underdrive. Milling-device is mountted at stainless-steel frame with grist case collecting grist coming out from the mill. Grist case is equipped with a hinged lid, designed for visual control and accessibility of malt and to provide a dust-free environment also. Personnel entrance to the malt-mill platform is enabled by stainless-steel antiskid stairway. On demand our supply can include also receiving malt-containers and scaling-device. Quantily of grisp delivered to the brewhouse can be measured also electronically (load-cells connected to central control panel).
Flexible Grist Auger:
The auger is attached directly to the grist case bottom outlet and is transported from there through hydrator where malt is mixed with water to mash-whirlpool vessel. Auger consists of 60mm diameter helix powered by electric motor mounted to hopper base frame. Helix is placed in 90mm diameter flexible polyethylene tube. Whole amount of malt needed for one brew is transferred in approx. 20 minutes.